Inspection Report
INSPECTION SUMMARY: (in comparison to principal’s instructions and reference sample, as available)
Reservation:
INSPECTION METHOD APPLIED:
Inspection method: P-INSP- WI - (version )
ANSI / ASQ Z1.4- 2003, Single sampling plans for normal inspection, Level I or II or others____:
Acceptable Quality Level (AQL) for: Critical: Major: Minor:
Sample size inspected:
Samples selected from carton numbers:
1. WORKMANSHIP APPEARANCE / FUNCTION INSPECTION FINDINGS:
Requested AQL Critical defective maximum allowed: _________ ? Within AQL ? Beyond AQL
Major defective maximum allowed: _________ ? Within AQL ? Beyond AQL
Minor defective maximum allowed: _________ ? Within AQL ? Beyond AQL
2. QUANTITY:
3. PRODUCT CONFORMITY:
Note: Two color shading lots in one color within grade 4 are acceptable commercially.
4. PACKING:
4.4 Packing assortment: checked on cartons, ? Conform ? Not Conform.
5. MARKING / LABEL:
6. PRODUCT-SPECIFIC DATA MEASUREMENTS/ FIELD TESTS ON REDUCED SAMPLE SIZE (as applicable for specific product/order)
6.1 Size measurement check on ____ sub-samples: ? within ? beyond tolerance ? actual finding,
Details please see attached size measurement chart.
6.2. Product weight check on 3 pieces per size: ? within ? beyond tolerance ? actual finding. (unit: gm/piece)
Factory scale: brand _______ _____________ ; calibration record: yes or no, period:_______
6.3 Function or assembly test: check on _____ sub-samples, found _____ .
Factory equipment: brand _________________; calibration record: yes or no, period: ______
6.4 Thickness: ________
6.5 Carton Information:
Carton weight: ________ kgs/ carton
Carton size: L x W x H = ______ x _______ x _______ cm
Carton with Metal Staple: ? Yes ? No
Carton with Nylon Band: ? Yes ? No
7. FOLLOW UP ACTIONS: (as applicable)
? Inspection certificate will be issued
? Supplier advised shipment scheduled for
? Manufacturer / supplier commented on inspection result as follow:
? Please instruct regarding issuance of inspection certificate.
? We sent you defective samples by AWB. No.: on Please advise your evaluation.
? We recommend the following corrective action
? Additional SGS service results due by
8. Informative Remark:
8.1 Inspection Environment:
8.2 Grey Scale
GB250-1995(ISO 105 A02-1993) standard grey scale is applied for color shade checking in nature environment.
The result is only for reference (Color variation evaluation: refer to P-INSP- WI-SL-001-01).
8.3. Others.
9. Attachments:
******* END ********
第二篇:验货报告
验货报告
甲方:青岛羽凝工艺品有限公司 乙方:青岛颐蕾特贸易有限公司 合同号:EF100324 检验时间:2010-5-20
本次验货所反映的情况真实有效。请甲方针对上述不良情况进行修改。发货后,如客人对此批货物质量提出异议或索赔,甲方承诺承担一切责任,与乙方无关。
甲方: 乙方
--------------------------- ---------------------------------