科技信息检索报告

时间:2024.3.23

科技信息检索 检索报告

级 专业 班

学 号 姓 名

检索课题概况

1、检索课题名称(中英文)

汽车自动变速器的发展及最新进展

The Development and The Latest Developments of Automatic Transmission of Vehicle

2、分析研究课题

随着车辆自动变速器理论与设计制造技术的不断完善,其应用范围越来越广泛。汽车行驶性能的好坏,不仅取决于发动机,而且很大程度上还依赖于变速器,所以自动变速器的发展,推进着汽车性能的发展。

根据以上分析,本课题主要是根据汽车自动变速器的发展及最新进展进行相关材料的查找。

3、检索策略

3.1 检索工具

1) 利用“中国知网”查找有关硕士、博士论文。

2) 利用“维普科技期刊数据库” 查找相关期刊论文。

3) 利用“SpringLink”查找相关论文。

4) 利用“百度”搜索相关知识。

3.2 检索词

1) 汽车 and 自动变速器

2) 汽车 and 自动变速器 and 发展

3) 汽车 and 自动变速器 and 最近进展

4、检索步骤及检索结果

4.1 检索工具

中国知网(中国博士学位论文全文数据库、中国优秀硕士学位论文全文数据库)

4.1.1检索式

1) 题名=汽车 and 自动变速器 and 发展

2) 主题=汽车 and 自动变速器 and 发展

3) 题名=汽车 and 自动变速器 and 最新进展

4) 主题=汽车 and 自动变速器 and 最新进展

4.1.2 检索年限

2000.1.1——2012

4.1.3 检索结果

[1] 叶勤 汽车自动变速器技术及其发展 重庆汽车学院 重庆400050,2006-05-30 中文摘要:汽车自动变速器是汽车中最重要的部件之一,其技术开发代表了现代汽车变速器技术的发展潮流.回顾了自动变速器的发展历程,介绍了3种主要自动变速器的结构和性能,并对其技术在国内外的发展作了介绍,分析了自动变速器的发展趋势.

[2]吴光强; 孙贤安 汽车自动变速器发展综述 同济大学汽车学院; 东京大学生产技术研究所 2010-10-15

中文摘要:对目前国际上5种自动变速器进行了全面系统地介绍.阐述了各种自动变速器的传动机理,给出其发展历史及国内外研究现状.从数字仿真技术、起步控制、换挡规律制定、换挡品质优化、执行机构设计以及制造工艺等角度提出了自动变速器的共性关键技术.总结了各种自动变速器的主要生产厂商以及在国内汽车市场应用情况.最后对比了其优缺点,并提出发展趋势.

[3] 李贤彬; 鲁民巧 汽车自动变速器的历史、现状及发展趋势 邢台职业技术学院学报:20xx年03期

中文摘要:汽车是高新技术的最具价值的商业载体,随着我国已正式加入WTO,追赶世界汽车技术的步伐将进一步加快,自动变速器作为汽车传动系统中一个十分重要的总成,其发展无疑反映了当今该项技术的潮流。本文对自动变速器的发展历史进行了回顾、介绍了3种自动变速器的特点,对国内外自动变速器的技术应用进行了阐述,并对自动变速器的发展趋势进行了展望和分析。

[4]刘晓军; 杜王强 汽车自动变速器的现状和发展前景 科技信息:20xx年26期 中文摘要:汽车自上个世纪末诞生以来,已走过了风风雨雨一百多年。从德国工程师卡尔本茨造出第一辆三轮汽车以每小时18公里的速度,跑到现在,诞生了从速度为零到加速到100公里/小时只需要三秒钟多一点的超级跑车。这一百年,汽车发展的速度是如此惊人!作为汽车关键总成之一,变速器技术也在不断地与时俱进。目前世界上使用最多的汽车自动变速器为MT手动式变速箱、AT液力自动变速器、AMT电子控制机械式自动变速器、CVT金属带式无级自动变速器四种型式。由于其具有许多优点,因此在汽车上应用越来越广泛。本文介绍了汽车变速器的基本类型及工作原理,分析了各自的特点,阐述了变速器国内外发展的现状和趋势,并提出了我国变速器产业发展的方向和建议。

[5]王洋; 郑晖; 王育欣 自动变速器发展情况及前景 科学发展与社会责任(A卷)——第五届沈阳科学学术年会文集 2008-10-13

中文摘要: 随着乘用车变速器技术的巨大发展,变速器由简单的手动逐渐发展出液力自动变速器、无级自协变速器和电控机械自动变速器等多种类型。又由于汽车消费者对驾驶操作性要求的不断提高,以及汽车燃油经济性和尾气排放的法规的不断加严,汽车生产商也在不断加大力度对乘用车变速器技术进行开发。本文说明了目前主要乘用车自动变速器的类型和特点,对液力自动变速器、无级自动变速器和电控机械自动变速器三种类型的自动变速器的优劣势和发展

4.2 检索工具

维普中文科技期刊数据库

4.2.1检索式

5) 汽车 and 自动变速器 and 发展

6) 汽车 and 自动变速器 and 最新进展

4.2.2 检索年限

2000.1.1——2012

4.2.3 检索步骤与结果

[1]何越 汽车自动变速器的应用与发展 《广东科技》 20xx年第11期

中文摘要:汽车自动变速器性能的好坏,关乎到汽车的整体质量,同时也就对人民 的生命和财产的安全有着重要的影响。主要是对目前市场上汽车所应用的汽车自动变速器的种类和范围进行了详细的分析,并对汽车自动变速器将来的发展趋势提出了自己的看法。

[2]黄方庆 积跬步以至千里中国轻型车自动变速器的未来发展 《汽车与配件》 20xx年第27期

中文摘要:燃油法规、排放法规和部分大城市对于机动车的限行措施,对于未来中国汽车工业的发展方向形成重要的影响。日趋严格的燃油法规将帮助消费者降低日常的使用费用,但是为满足燃油法规和排放法规的要求,大量的新技术将被应用于车辆,消费者的购车成本将上涨。另一方面,对于汽车的限购措施,不论是北京采取的摇号方式还是上海的拍卖方式,都将推高消费者的采购预算,而消费者采购预算的提高,将使一些受制于成本而难以推广的技术获得应用推广的机会。因此有助于提高效率、降低碳排放、提高驾驶便捷性的技术将在未来几年获得广泛的应用。

[3]李玉玲 为中国自动变速器行业发展添砖加瓦 记“第四届GRC变速器技术研讨会” 《汽车与配件》 20xx年第29期

中文摘要:今年6月中旬,由吉孚动力技术(中国)有限公司(GRC)主办的"高效,低碳的传动解决方案"技术研讨会在江苏吴江市成功举办。来自中国汽车技术研究中心、HIS、德国GIF、大陆集团、博世集团、壳牌、LMS、东风汽车技术中心等研发专家作了精彩演讲,就变速器解决方案、传动系统效率优化、传动系统功能及特性优化解决方案、测试及测试设备和工具、应用于电动车和混合动力车的传动技术、传动系统关键部件等研究方向各抒己见。来自全国汽车变速器行业,以及相关研究机构、学府等超过150人出席了该会议。

[4]张蒨 百川 邵蕊 中外专家畅谈自动变速器发展——访NAMI公司CEO Maxim Nagaytsev与中国汽车工程学会葛松林副秘书长 《现代零部件》 20xx年第6期

中文摘要:在2012(第四届)国际先进汽车自动变速器技术研讨会期间,MC记者有幸与本次会议的主办方负责人之一——中国汽车工程学会葛松林副秘书长以及研讨会的惟一合作伙伴——俄罗斯国家汽车工程研究院NAMI公司首席执行官Maxim Nagaytsev先生进行了一次愉快的座谈。

[5]齐明 “透过上海车展,看汽车新技术”系列报道之三——自动变速器发展新亮点 《汽车维修与保养》 20xx年第7期

中文摘要:上海车展上亮相的新款奥迪A6、宝马X3等多款车系均采用了采埃孚8速自动变速器,并且同时基于奥迪A6、Q5和宝马5系等车型推出了采用采埃孚8速混合动力版自动变速器的混合动力版车型。这些最新的变速器技术在提高了驾驶性的同时,大幅降低了能耗和二氧化碳的排放量。充分体现了最新款车型的环保趋势。

4.2检索工具

SpringerLink

4.2.1检索式

7) vehicle and automatic transmission and development

8) vehicle and automatic transmission and latest development

4.2.2 检索年限

2000.1.1——2012

4.2.3 检索结果

[1]Chao Jiang, Mingli Huang, Gold Eckart and Xiaoning Xiang;Development of a New 6-Speed Dual Clutch Transmission for the China Market;Lecture Notes in Electrical Engineering, 2013, Volume 193, Part 3

Abstract:Shanghai Automotive Industries and its affiliate, Shanghai Automotive Gear Works present the DCT 360, the first dual clutch transmission developed specifically for the China automotive market.This transmission was jointly developed by SAIC with support from core cooperators and manufactured by SAGW. The first vehicle application of this 6-speed dual-clutch transmission is new generation of Roewe 550, produced by SAIC Motor Passenger Vehicle. The 6-speed dual-clutch transmission features BorgWarner DualTronic? technology, in the form of dual clutch and electro-hydraulic control modules, both produced by BorgWarner United Transmission Systems in Dalian, China. This paper will provide a design overview of the transmission architecture, main characteristics and key subsystems. The paper will also provide an overview of the development process, and the fuel economy benefit to the vehicle.

[2]Yong Chen, Mike Turner, Michael Gilcrist, Wenjiang Zhao and Daguo Luo, et al. Research on Development Process of 7 Speed Wet Dual Clutch Transmission;Lecture Notes in Electrical Engineering, 2013, Volume 193, Part 3, 275-282

Abstract:Seven speed wet dual clutch automatic transmission is a product characterized by an integration of electrics, mechanics and hydraulics.The optimized efficiency, good NVH performance and durability low cost are considered during the development. In order to save time and optimize design, process development research method based on simulation model is applied. Meanwhile, basic

test is combined to guarantee validity of simulation model. Therefore, design process is optimized.

[3]Xi Lu, Shu-han Wang, Yan-fang Liu and Xiang-yang Xu;Application of clutch to clutch gear shift technology for a new automatic transmission; Journal of Central South University Volume 19, Number 10 (2012)

Abstract:For the purpose of engineering development for a new 8-step speed automatic transmission, a simplified dynamic model for this gearbox was established and key parameters which affected the shift quality were analyzed. Aiming at four different shift types, the ideal characteristics of shift clutch and engine control were set up. By using torque estimation method, PI slip control algorithm and engine coordinated control principle, the control model and transmission controller were well developed for three shift phases which included rapid-fill phase, torque phase and inertia phase. The testing environment on the rig and prototype vehicle level was built and the testing results obtained in ultimate condition could verify the accuracy and feasibility of this shift control strategy. The peak jerk during shift process was controlled within ±2 g/s where the smooth gearshift was obtained. The development proposal and algorithm have a high value for engineering application.

[4]Yong Chen, Daguo Lou, Hua Chen and Fuquan Zhao;A Study on Performance Simulation and Optimization of an Automatic Transmission;Lecture Notes in Electrical Engineering, 1, Volume 193, Proceedings of the FISITA 2012 World Automotive Congress, Part 3, Pages 283-294

Abstract:To shorten the AT development cycle and verify the design solution beforehand, the simulation analysis based modular development methods, including the NVH design and lubricating system CFD analysis of AT, are utilized to develop a hydraulic valve body with AMESIM and develop an oil pump with FLUENT, and carry out safety reliable design of transmission system with an advanced multi-body dynamic analysis method to optimize key component structure and effectively improve the AT performance. Meanwhile, the application of simulation drive design technology, in which CAE integrated technology is regarded as a key one, can significantly shorten the development cycle of new products and quantify the empirical knowledge and test data in the past development with higher development efficiency. In addition, the application of CAE engineering analysis and prediction technology helps the engineers with simulation analysis and prediction; therefore the product performance and quality can be significantly improved before obtaining type approval and putting into production, thereby reducing design cost and test frequency, as well as shortening the time for products to be put on the market.

[5]Shu-han Wang, Xiang-yang Xu, Yan-fang Liu, Zhen-kun Dai, P. Tenberge and Wei Qu;Design and dynamic simulation of hydraulic system of a new automatic transmission; Journal of Central South University of Technology Volume 16, Number 4 (2009), 697-701

Abstract:A new hydraulic system of a novel automatic transmission (AT) was designed. The dimension and structure of valves and cylinders were designed by theoretical calculation. The dynamic simulation model of hydraulic system of AT

was established by ITI-SimulationX. Simulation results and theoretical design results were compared to confirm the simulation model. Based on the confirmed simulation model, the simulation results of pressure and flow of the hydraulic system were analyzed. The dynamic simulation method is very helpful for designing and analyzing the performance of hydraulic system and further optimization design. The theoretical design method and dynamic simulation model are feasible for the real industrial applications. The research results can be used in hydraulic system design and optimization.

4.2 检索工具

百度

4.2.1检索式

汽车自动变速器的发展

汽车自动变速器的最新进展

4.2.2 检索年限

2000.1.1-2012

4.2.3 检索结果

[1]汽车自动变速器的发展过程 .cn/bbs/thread-c-496-11510568-1.html

[2]当前汽车自动变速器的技术发展

/2012-02-01/137633909.html

[3]汽车自动变速器的发展历史及其最新技术进展和在现有车型上的应用 /file/w6ssrwxaucizsixcxoos6i33_1.html

[4]中国汽车自动变速器技术现状及市场展望

/p-79353518182.html

[5]汽车自动变速器结构和维修的国内外现状和动态

/question/41323123.html

5、检索结果评价

本次检索采用2个中文数据库、1个网络搜索引擎、1个外文数据库,查找到的信息有博士论文、优秀硕士论文、期刊论文、电子图书、网络评论等多种形式的资料,内容完整,且都是近十年的最新材料,有较高的参考价值。通过检索,不仅查找了课题相关信息,也发现了一些课题的新问题和新动向,检索结果良好。

6、综述

本次检索获得了20个检索结果,主要论述了汽车自动变速器的发展以及最新技术进展的概况。文章《汽车自动变速器技术及其发展》主要阐述了汽车变速器技术的发展潮流,并通过3种主要自动变速器介绍了自动变速器的发展。文章《汽车自动变速器发展综述》给出了自动变速器的几项关键技术以及其技术的发展。文章《汽车自动变速器的历史、现状及发展趋势》介绍了自动变速器的历史,通过国内外自动变速器的对比阐述了其发展以及趋势。

文章《汽车自动变速器的现状和发展前景》分析了几种常见的自动变速器的原理和特点,并给出了对自动变速器发展的建议。文章《自动变速器发展情况及前景》主要介绍了几种常见自动变速器的优劣和发展。文章《汽车自动变速器的应用与发展》对现有市场上的自动变速器的种类和特点进行了详细的介绍。文章《积跬步以至千里中国轻型车自动变速器的未来发展》主要通过对现在的市场情况的分析对自动变速器今后的特点及发展进行了展望。文章《为中国自动变速器行业发展添砖加瓦 记“第四届GRC变速器技术研讨会”》主要介绍了自动变速器行业中的GRC变速器技术研讨会的主要内容。文章《“透过上海车展,看汽车新技术”系列报道之三——自动变速器发展新亮点》透过上海车展分析介绍了现阶段汽车自动变速器的主要特点。文章《Development of a New 6-Speed Dual Clutch Transmission for the China Market》主要介绍了一种新型双离合变速器的设计结构特点还有发展历程。文章《Research on Development Process of 7 Speed Wet Dual Clutch Transmission》研究了湿式双离合变速器的发展。文章《Application of clutch to clutch gear shift technology for a new automatic transmission》介绍了一种最新自动变速器的离合器到离合器的转换的技术应用。文章《A Study on Performance Simulation and Optimization of an Automatic Transmission》通过自动变速器的性能仿真和优化阐述了其发展趋势。文章《Design and dynamic simulation of hydraulic system of a new automatic transmission》介绍了新自动变速器液压系统的设计和仿真。

更多相关推荐:
文献检索报告范文

科技信息检索检索报告级专业班学号姓名说明利用所学的文献信息检索知识和检索方法,结合自己的专业,自定检索课题,从多方面广泛收集有关资料,并完成该课题的综合检索报告。一、数据库选择要求1.中文数据库:CNKI系列资…

信息检索报告

信息检索报告班级工程管理姓名马永丽学号120xx6117信息检索发展信息是人类生存与发展的三大支柱之一我们正处于信息爆炸时代每天都有海量的数据并且急速增长面对这样一个庞大无比动态变化的网络信息如何有效地获取管理...

信息检索综合报告

信息检索综合报告姓名学号学院年06月0120xx日1课题名称中文图书馆个性化信息服务现状研究课题名称英文Researchstatusofpersonalizedinformationserviceoftheli...

信息检索学习总结报告

一、自我评价对于本学期的信息检索课程,我自认为自己认真积极,从不缺课、迟到、早退,学习尽心尽力。对于老师讲解的知识也掌握的较为清楚,并且积极与同学交流讨论、互换经验。对上机操作也较为熟悉,信息系意识得到增强,熟…

科技信息检索与技术综合报告

科技信息检索与技术综合报告上课时间周四第89节第18周组员80后与90后大学生比较研究quot80quotandquot90quotComparativeStudyofCollegeStudents一检索12研...

信息检索课题报告

课题检索报告学号XXXX姓名XXX课题名称3D打印技术对社会的影响一课题分析1文献类型期刊论文2文献语种中文3文献范围无特别要求4检索词按照检索词切分法以及检索词筛选原则本课题检索词初定为3D打印影响5预期的文...

信息检索报告格式及范例

信息检索报告格式检索课题题目一分析课题分析课题是实施检索最重要的一步也是检索效率高低或成败的关键课题分析中要注意如下三点a弄清课题研究的目的性和重要性明确课题所属的学科范围b掌握与课题有关的专业知识c明确课题的...

文献检索检索报告实例参考

信息检索课程作业文献检索课程综合作业课题名称专业班级学号姓名完成时间20xx年月日信息检索课程作业评分体系及项目得分评分标准1课题难度值05分2选择和使用工具书检索系统的情况1选择检索工具系统数据库的种类至少5...

检索报告模板

西昌学院信息检索课程教学考核专用20xx年3月信息检索报告专业09化学姓名廖孝国学号090607006020xx年5月15日西昌学院信息检索课程教学考核专用20xx年3月西昌学院信息检索课程教学考核专用20xx...

信息检索报告

2301702102号学线寒筱徐名姓业专程封工信通级4102院学院密学程工子电与理物本科课程考查专用封面作业题目信息检索课程报告所修课程名称信息检索修课程时间20xx年03月至20xx年06月完成作业日期课程结...

文献信息检索报告综述

文献检索报告任课教师院系专业班级学号姓名课题名称水煤浆喷嘴有限元分析及涂层材料应用关键词水煤浆喷嘴有限元图层检索式一任意字段水煤浆喷嘴有限元图层检索式二任意字段水煤浆喷嘴有限元检索式三任意字段水煤浆有限元检索式...

专题文献信息检索检索实验报告

华北科技学院图书馆信息检索教研室实验报告册实验项目序号实验七实验课程名称科技文献检索实验项目名称专题文献信息检索开课学期20xx2013学年第一学期授课教师XXXXX实验指导教师XXXXX专业土木工程班级土木B...

信息检索检索报告(42篇)