消防复查申请书

时间:2024.3.19

复查申请书

绍兴市公安消防支队柯桥区大队:

根据绍柯公消安不字〔2015〕第0001号,存在下列消防安全问题:1.二层门窗上设置影响逃生和灭火救援的障碍物(防盗窗);2. 二层西侧安全出口封闭;3. 二层营业场所内设置厨房,且未进行防火分隔;4.客房内未设置疏散示意图、未设置禁止卧床吸烟标志等。现已整改完毕。整改为1.二层门窗上设置影响逃生和灭火救援的障碍物(防盗窗)已经打开;2. 二层西侧安全出口开放;3. 二层营业场所内设置厨房已经搬离;4.客房内已经设置疏散示意图、禁止卧床吸烟标志等。现申请复查,望批准。

绍兴市柯桥区华舍铂悦旅馆

20xx年1月21日


第二篇:消防产品型式认可申请书


消防产品型式认可申请书

APPLICATION FOR TYPE-APPROVAL OF FIRE PRODUCTS

首次申请/First Application        □        

扩大范围申请/Scope Expansion    □       

复评换证申请/Renewal                   □

换版申请/Format Change         □

申请企业名称/ Application product category:

(加盖公章/Seal)

生产厂名称/ Factory:

申请产品类别/Category of Product:

填报日期/Submission Date (yyyy/mm/dd):        年       月       日

公安部消防产品合格评定中心印制

Published by China Certification Center for Fire Products, Ministry of Public Security, PRC


申 请 企 业 须 知

1、申请企业必须严格按照《消防类产品型式认可实施规则》中工厂基本条件的要求建立并实施有效的质量管理,确保企业的质量保证能力符合实施规则的基本要求;

2、申请企业必须符合《消防类产品型式认可实施规则》中生产设备及检验设备的最低配置要求;

3、申请企业须严格遵守型式认可程序及时限要求,正常情况下,接到工厂检查通知后的30日内应接受工厂条件检查,并应在规定时间内完成对不符合项的整改工作,自抽样之日起15日内将样品送到指定检测机构进行检验,并按期缴纳相关费用;如遇特殊原因,必须及时通报公安部消防产品合格评定中心;

4、申请企业获证后,必须严格按照《消防类产品型式认可实施规则》的规定,正确使用型式认可证书和标志。对有违规者,公安部消防产品合格评定中心将进行严肃处理。

5、申请企业获证后,所生产及销售的产品必须与发证检验样品保持一致,产品质量必须符合型式认可规则和相关标准要求。若必须对涉及产品一致性的关键因素,如关键原器件、原材料、关键设计及主要生产工艺发生变更,以及生产场地搬迁、法人及主要技术人员发生变更时,获证企业必须及时向公安部消防产品合格评定中心申报,由中心按照《消防类产品型式认可实施规则》要求安排确认工作。未经中心确认,不得生产及销售产品,对违规者,公安部消防产品合格评定中心将进行严肃处理,由此而导致的一切责任均由违规企业承担。

The Notice of the Applicant

1.     The Applicant must not only constitute a quality control and bring into effect which according to the request of the factory’s  postulate, but also make sure the quality guarantee capacity of the corporation according to the request of the implement rules.

2.     The applicant must measure up the lowest configuration requirement of producing equipment and checking equipment that refers to the 《The Implement Rules Of The fire fighting product Type-Approval》.

3.     The applicant must follow the authentication procedure and the time limit requirement. In normal condition, the enterprise should accept the work condition inspection within 30 days after receive the information, and finish the modification of the unaccepted item within stated time. The enterprise should send the sample to the appointed examine institution in 15days after the inspection, and pay for the related bill. The enterprise should declare to CCCF in time if there is any special case.

4.     After getting the certificate, the applicant must follow the implement rules strictly and use authorized certificate and symbol correctly. CCCF will sternly punish the foul.

5.     After getting the certificate, the applicant must keep the products they produce and sell the same with the inspecting samples. The quality of the products must measure up the authentication regulations and the correlative standards. If the some key factors that related to the coherence of the products have to be modified, such as key source apparatus, raw material, core design and primary produce technique, as well as the workplace, juridical person and key technical personnel change, the enterprise must declare to CCCF. And CCCF validates the situation according to the implement rules. The enterprise can't produce and sell any products without the validation. CCCF will sternly punish the foul. And the foul is charged of all the correlative obligation.

声     明

我代表申请企业郑重声明:

1.本企业遵循“诚信第一”的基本原则,承诺遵守国家有关法律法规及公安部消防产品合格评定中心(以下简称CCCF)制定的型式认可实施规则的所有要求及型式认可程序。

2.本企业同意按型式认可规则的要求提供评价所需文件和资料,所提供的信息均真实有效,否则承担由此引起的一切法律责任。

3.本企业保证按型式认可合同及相关要求支付型式认可费用,并为实施型式认可产品型式认可工作提供所需要的资源。

4、本企业将妥善保管检验报告、工厂检查报告和型式认可变更确认等型式认可的相关资料,以备监督检查、飞行检查及有关证后监督工作时使用,公安部消防产品合格评定中心将不承担获得产品合格型式认可的生产厂或销售商应承担的法律责任。

5、本企业完全接受《申请企业须知》中所涉及的全部内容。

Statement

I, on the behalf of the Applicant, make the statement hereby:

1.                  The Applicant is willing to comply with the Implement Rules for Type-Approval formulation which by China Certification Center for Fire Products (So-called as CCCF).

2.                  The Applicant does agree to submit the necessary documents and information which truthfulness has been ensured by the Applicant, From this otherwise undertakes all legal liability which causes.

3.                  The Applicant guarantee to make the payment in accordance with the Type-Approval Contract and/or the relevant requirement.

4.                  The Applicant will keeping the relevant information about authentication properly, such as the prove report, jerque report of factory and the validate of the authentication change, which will be used in the supervise inspect, sudden inspect and the supervisal task after application. CCCF will not toe the scratch which must be beared by the factory or merchant who get the product eligibility authentication.

5.                  The Applicant does accept the contents 《The notice of the Applicant》contained.

申请企业法定代表人/Authorized Person of the Applicant Firm:              

(签名Signature/盖章Seal)

                       日期/Date (yyyy/mm/dd):    年    月    日

一、申、地

Applicant Information

1 申请企业/Applicant Firm:

1.1申请企业名称/Name in Chinese and English:                                                

                                                                            

1.2申请人地址、邮编/Mailing Address and Postcode:

注册地址Registration address:                               邮编:        

通讯地址Mailing address:                                    邮编:       

1.3 法定代表人/Juridical Person:               电话/Tele phone:                    手机/Mobile phone                   

1.4 联系人/Person to be Contacted:              电话/Telephone:                     手机/Mobile phone                   

1.5 传真/Fax:             

1.6 电子邮件/E-mail:             

1.7 组织机构代码/ Organizations and agencies code:                    

1.8 组织性质代码/ Organization nature code:                           (按本申请书第六项的要求填写)

2 制造商/Manufacturer

2.1制造商名称/Name in Chinese and English:                                          

                                                                            

2.2制造商地址、邮编/Manufacturer Address and Postcode:

注册地址Registration address:                               邮编:       

通讯地址Mailing address:                                    邮编:       

2.3 法定代表人/Juridical Person:              电话/Telephone:                     手机/Mobile phone                   

2.4 联系人/Person to be Contacted:              电话/Telephone:                     手机/Mobile phone                   

2.5 传真/Fax:             

2.6 电子邮件/E-mail:             

2.7 组织机构代码/组织机构代码/ Organizations and agencies code:                                               

2.8组织性质代码/ Organization nature code:                     (按本申请书第六项的要求填写)

3  生产厂/factory:

3.1生产厂名称/ Name in Chinese and English:                                                           

                                                                            

3.2实际生产厂地址、邮编/Address & Postcode:

注册地址Registration address:                               邮编:       

通讯地址Mailing address:                                    邮编:       

实际生产厂地址Actual plant address:                              邮编:       

3.3 法定代表人/Juridical Person(if applicable):            电话/Telephone:          手机/Mobile phone                   

3.4 联系人/Person to be Contacted:               电话/Telephone:                     手机/Mobile phone                   

3.5传真/Fax:              

3.6电子邮件/E-mail:               

3.7 组织机构代码Organizations and agencies code:                    

3.8 组织性质代码/ Organization nature code:                           (按本申请书第六项的要求填写)

4  企业注册资本/ Enterprise registered capital:       (万元/ Ten thousand Yuan),经营范围Management scope:                                                                     

                                                                                 

                                                                                

5  单位总人数/Enterprise total number of people    ,高级技术职称人数/ High-level technical title population    ,中级技术职称人数/ Intermediate technical title population    ,初级技术职称人数/ Primary technical title population   

  设计开发技术人员/ Design development technical personnel    ,  生产制造技术人员/ Manufacturing technical personnel    ,  产品检验技术人员/ Product inspection technical personnel    ,  售后服务技术人员/ Post-sale service technical personnel    ,  其他技术人员/ Other technical personnel    。(注:上述人数均为所涉及申请产品的人数)

6  申请型式认可产品的最大年生产能力/ Application pattern approval product most bumper year productivity:                          

  (例:灭火器XX具/年;防火门XXX平米/年;消防应急灯具XX具/年等)

7  申请型式认可产品使用型式认可标志形式/ The application pattern approval product use pattern approves the symbol form:

A、  □ 消防产品身份信息发布及标志/ Fire product status information issue and symbol;      B、  □ 普通消防产品型式认可标志/ Ordinary fire product pattern approval symbol;。

8  中国代表处或中国办事处名称, 联系人姓名, 地址, 邮编, 电子邮件、电话、移动电话及传真/ Applicant’s representative or local office in China, Person to be contacted, Address & Postcode, E-mail, Telephone, Mobile No. & Fax No..:                                                         

                                                                                 


二、申

Product Information for Type-Approval

注:若申请企业属复评换证申请,在备注栏中注明是全部产品或是部分产品换证,并提交申请换证产品型式认可证书复印件/ If applies for the enterprise to need to transform the certificate, needs to indicate is the complete product or the partial products, and must submit the application product the pattern approval certificate copy。


申请型式认可产品名称、型号及照片(与申请产品一一对应)

Product Name, Type and Photo for Type-Approval

                          贴  照  片  处

                           Product Photo

名称                               型号

Name                               Model    

 

                           贴  照  片  处

                           Product Photo

名称                                型号

Name                                Model

 

三、申 请 企 业 承 诺

我代表申请企业郑重承诺:

1.始终遵守型式认可计划安排的有关规定;

2.为进行评价作出必要的安排,包括配合检查组的工作、允许检查组进入需进行检查的区域、查阅所有的记录(包括内部审核报告、人员评价文件等)、提供必要的交通工具等;

3.按合同规定和相关规定,及时缴纳各项费用,及时从“中国消防产品信息网”获取相关信息;

4.按有关法律法规、规章的要求,正确使用证书和标志;

5.谨慎使用产品型式认可结果,不损害公安部消防产品合格评定中心的声誉;不对社会产生误导,不未经许可发表声明;

6.当证书被暂停、撤销、中止型式认可程序时,立即停止涉及型式认可内容的广告及宣传,并按要求将所有型式认可文件(至少应包含型式认可证书及型式检验报告)交回公安部消防产品合格评定中心,封存型式认可标志;

7.在传播媒体中对产品型式认可内容的引用,严格遵守国家的相关要求。

   申请企业法定代表人签字:

(加盖公章)

年    月     日

Commitment of the Applicant Firm

I represent apply for the enterprise to pledge seriously:

1:Make a Statement related to the certification only in the scope of approved certification

2:In order to carry on the appraisal to make the essential arrangement, including the coordinate inspection team's work, the permission inspection team enters must carry on the inspection the region, consult all records (including internal check report, personnel to appraise document and so on), to provide the essential transportation vehicle and so on.

3:According to the contract provision and the related stipulation, pay each item of fee promptly, promptly from “Chinese fire prevention product information network” gain related information

4:According to the relevant law laws and regulations, the rules and regulations request, uses the certificate and the sign correctly

5:The discrete use product authentication result, does not harm the Ministry of Public Security fire prevention product qualified assessment center the prestige; Does not have misleading to the society, not issues the statement without the permission

6:When the certificate is suspended, the cancellation, stops authenticating the procedure, immediately stops involving the authentication content the advertisement and the propaganda, and will possess the authentication document according to the request (to contain authentication certificate and pattern survey report at least) returns the Ministry of Public Security fire prevention product qualified assessment center, seals the authentication symbol

7:In the communication media to the product authentication content's quotation, should meet the national related requirement

Signature:

(Signed by the authorized person of the Applicant firm)

Date:

四、已获证产品情况

Description of the Product Already Obtained CCCF Certification

五、申 请 材 料 附 件

请随本申请书提供如下附件:

1、    企业营业执照副本和组织代码证书复印件(含年检情况,并加盖企业印章)。

2、    申请企业概况、组织机构图及与其对应的部门职责。

3、    技术文件:

1)产品生产技术来源的简要说明;

2)产品设计文件(如:产品图纸、设计计算说明书等):

3)产品工艺流程图(注明关键工序和质量控制点):

4)设备布局平面图;

5)原材料、关键件质量控制文件目录。

4、    产品关键件或产品特性描述填报表(从http://www.cccf.net.cn网站下载相关表格,并填报)。

注:与申请产品一一对应,并加盖公章

5、    生产设备和检验设备清单

6、    企业符合安全要求、劳动保护要求、环境保护要求的证明材料

7、    产品销售流向信息上报表

8、    所有申请材料的电子文档

9、    需要提交的其他材料

注:以上材料均需一式两份提交;并需签订型式认可合同书(网上下载,同样一式两份)。


六、组织性质代码

      Organization nature code

更多相关推荐:
复查申请书

复查申请书齐分局信访办申请人高宪金男汉族19xx年8月20日生职工公民身份证号23022619xx0820xx13现住址黑龙江省杜尔伯特蒙古族自治县泰康庆齐路大山街7193号联系方式182xxxxxxxx被申请...

信访事项复查申请书

信访事项复查申请书信访事项复查申请书申请人XXX女XX岁身份证号码XXXXXXXXXXXXXXXXXX住XXXXX街道XX村XX组XXX号电话XXXXXXXXXXX被申请人XX街道办事处法定代表人XXX职务主任...

复查申请格式

复查申请书鄂温克旗人民政府我是住址我反映的问题单位给我出具了处理意见我对处理意见不服特向鄂温克旗人民政府提出复查申请我对处理意见不服主要有以下几点1处理意见的内容中某部分针对这一点应该为事实和所根据的证据2处理...

复 核 申 请 书

复核申请书申请人男汉族年月日出生住身份证号被申请人XX市公安局交通管理大队复核请求请求依法撤销公交认字20xx第号道路交通事故认定书对本起交通事故重新作出事故责任认定事实和理由被申请人的20xx第号道路交通事故...

信访复查申请书

信访复查申请书一、申请人:XX县供电有限责任公司全民劳动合同工人,共307人:二、被申请人:XX县供电有限责任公司三、申请事项:申请人不服XX县供电有限公司2013年4月23日作出的关于农电工给市长信箱要求落实…

复查申请书

复查申请书安定区人民政府我是内官营镇万崖村村民曹兰花因我对安定区内官营镇人民政府做出的安内政初查字20xx21号关于万崖村村民曹兰花反映信访事项的答复意见不服现向安定区人民政府提出复查申请情况如下19xx年农历...

计量标准复查申请表(样版)

计量标准考核复查申请书20xx粤量标粤企证字第000号计量标准名称标准装置计量标准代码00000000申请考核单位公司计量站组织机构代码单位地址邮政编码联系人联系电话20xx年1月16日1说明1根据中华人民共和...

精密密压力表计量标准考核(复查申请书)

计量标准考核复查申请书20xx川南量标法证字第0007号计量标准代码12415100申请单位单位地址邮政编码联系人联系电话年月日申请复查时填写说明1根据中华人民共和国计量法的有关规定凡建立社会公用计量标准或企事...

信访复查申请书(模板)

复查申请书格式标准A4纸打印关于XXX上访人的名字反映XXX问题的信访复查申请一信访人的自然情况即上访人身份证上面的个人信息及联系方式包括姓名年龄住址工作单位居民身份证号码以及个人联系方式集体访信访人须提供两人...

信访复查申请1

信访复查申请书一申请人营山县安固乡宝顶村民办教师王小春二被申请人营山县教育局三申请人不服营山县教育局当年对我的处理认定即违规生育第二胎确实超计划生育应取消民师资格符合政策规定给予落实政策和待遇不予支持的意见根据...

复查申请书样本

复查申请书浚县信访事项复查委员会申请人姓名性别年龄民族身份证号码单位或住址被申请人复查请求事项我对处理意见第条不服要求对问题进行复查事实与理由12申请人签字盖章年月日提供材料1申请人身份证原件及复印件2依法逐级...

复查申请书模板

复查申请书XXX人民政府申请人XXX男女XX岁身份证号码XXXXXXXXXXXXXXXXXX户籍地址XXXXX通信地址XXXXX联系电话XXXXXXXXXXX信访事项一二三即申请人最初反映的信访诉求申请复查事项...

复查申请书(37篇)